RUN1800P Electromechanical gear motor with built-in control unit, with inductive limit switch 1800kg
To automate sliding gates up to 1800 kg. Suitable for use in extreme conditions and in systems intended for intensive use.
Main features:
- Self-ventilated motor with inductive limit switch (RUN1800P/RUN2500P) and electromechanical limit switch (RUN1800/RUN2500/RUN2500I).
- Easy to install: the BlueBUS system allows connections with just two wires between the control unit and up to 15 control, safety and signaling devices.
- Safe: the acceleration (at the start of the maneuver) and deceleration (at the end of the maneuver) settings are precise and reliable.
- Advanced temperature sensor: Run is able to manage its force, adapting it to the different climatic and environmental conditions while at the same time adjusting the thermal protection and self-ventilation intensity depending on the temperature detected.
- Master/slave selection: also automatically synchronizes 2 motors, allowing automation of sliding gates with two opposing leaves.
- Practical and functional: the control unit (and the inverter in the RUN2500I version) housed in Run can be connected via a practical plug-in connector.
- Quiet: gearmotor on bearings. RUN2500I version with integrated inverter.
- Flawless movement: the inverter enables the three-phase motor to be powered and operated with 230 VAC single-phase current, adjusting the frequency to regulate the automation speed from a minimum of 8.2 m/min to a maximum of 15.4 m/min. During the automation deceleration phase, the inverter communicates with the control unit and increases the torque, improving performance and reducing the risk of the automation blocking in the presence of obstacles.
More information and user manuals can be found in the "Downloads" section.
| Manufacturer | Nice |
| Current (A) | 3A |
| IP standard | IP44 |
| Power | 700W |
| Maximum gate weight | 1800kg |
| Greitis | 0,17m/s |
| Gate width | 14m |
| Power | 230V AC |
Home delivery (recommended)
You will get an e-mail with parcel ID, once the goods are sent out
| up to 5 kg | 3,99 € | up to 10 kg | 5,00 € |
| up to 30 kg | 9,00 € | up to 75 kg | 15,00 € |
| up to 200 kg | 70,00 € | up to 1000 kg | 200,00 € |
RUN1800P Electromechanical gear motor with built-in control unit, with inductive limit switch 1800kg
To automate sliding gates up to 1800 kg. Suitable for use in extreme conditions and in systems intended for intensive use.
Main features:
- Self-ventilated motor with inductive limit switch (RUN1800P/RUN2500P) and electromechanical limit switch (RUN1800/RUN2500/RUN2500I).
- Easy to install: the BlueBUS system allows connections with just two wires between the control unit and up to 15 control, safety and signaling devices.
- Safe: the acceleration (at the start of the maneuver) and deceleration (at the end of the maneuver) settings are precise and reliable.
- Advanced temperature sensor: Run is able to manage its force, adapting it to the different climatic and environmental conditions while at the same time adjusting the thermal protection and self-ventilation intensity depending on the temperature detected.
- Master/slave selection: also automatically synchronizes 2 motors, allowing automation of sliding gates with two opposing leaves.
- Practical and functional: the control unit (and the inverter in the RUN2500I version) housed in Run can be connected via a practical plug-in connector.
- Quiet: gearmotor on bearings. RUN2500I version with integrated inverter.
- Flawless movement: the inverter enables the three-phase motor to be powered and operated with 230 VAC single-phase current, adjusting the frequency to regulate the automation speed from a minimum of 8.2 m/min to a maximum of 15.4 m/min. During the automation deceleration phase, the inverter communicates with the control unit and increases the torque, improving performance and reducing the risk of the automation blocking in the presence of obstacles.
More information and user manuals can be found in the "Downloads" section.
| Manufacturer | Nice |
| Current (A) | 3A |
| IP standard | IP44 |
| Power | 700W |
| Maximum gate weight | 1800kg |
| Greitis | 0,17m/s |
| Gate width | 14m |
| Power | 230V AC |
Home delivery (recommended)
You will get an e-mail with parcel ID, once the goods are sent out
| up to 5 kg | 3,99 € | up to 10 kg | 5,00 € |
| up to 30 kg | 9,00 € | up to 75 kg | 15,00 € |
| up to 200 kg | 70,00 € | up to 1000 kg | 200,00 € |
(1).jpg)
